Silicotronix B6U100A16 Three-Phase Bridge Rectifier Module
Documents
B6U100A16 (VP002312): Silicotronix Three-Phase Bridge Rectifier Module, 1600 V, 100 A
The Silicotronix B6U100A16 is a three-phase full-wave diode bridge rectifier module (six diodes) in an isolated industrial package. It converts 3-phase AC mains into DC for the DC link of drives, welders and DC power supplies, with 1600 V repetitive reverse voltage and 100 A output current.
Key specifications
| Circuit | Three-phase full-wave bridge (6 diodes) |
| Peak repetitive reverse voltage VRRM | 1600 V |
| Peak non-repetitive reverse voltage VRSM | 1700 V |
| Output DC current IO (TC = 100 °C) | 100 A |
| Forward surge current IFSM (10 ms, 50 Hz) | 1200 A |
| I²t (VR = 0.6 VRRM) | 7200 A²s |
| Peak forward voltage VFM (IFM = 100 A, 25 °C) | 1.3 V |
| Reverse current IRRM (VRRM, 150 °C) | 8 mA |
| Thermal resistance Rth(j-c) | 0.2 °C/W |
| Isolation voltage VISO (AC, 1 min) | 2500 V |
| Junction temperature Tj | 150 °C max |
| Storage temperature | -40 to +125 °C |
| Mounting torque (base M6 / terminals M5) | 4 N·m / 4 N·m |
| Weight | 195 g |
Source: Silicotronix B6U100A datasheet (no revision printed). Always check the full datasheet before design.
Features
- Complete 3-phase bridge in one isolated module, fewer parts and simple wiring
- Low forward voltage drop (1.3 V at 100 A) for lower losses
- 2500 V AC isolation between terminals and copper base
- Screw terminals (M5) and M6 base mounting, standard industrial package
Typical applications
- Input rectifier for PWM inverters, VFDs and servo drives
- Inverter welding machines
- DC power supplies, battery chargers and UPS input stages
- Electroplating and general industrial rectifiers
Selection tips
- For 415 V AC mains, 1600 V VRRM gives good margin against line surges; use the 1200 V B6U100A12 only for lower mains.
- Rated 100 A at 100 °C case: size the heat sink so case temperature stays below 100 °C at full load; use thermal paste and the 4 N·m torque.
- Add RC snubbers or MOVs on the AC side where line transients are high.
FAQ
What is the difference between B6U100A12 and B6U100A16?
Only the voltage class: A12 = 1200 V, A16 = 1600 V VRRM. Current and package are the same.
Is the base isolated?
Yes, the copper base is isolated (2500 V AC, 1 min), so several modules can share one heat sink.
Can I get a matching heat sink?
Yes. V P Electronics makes extruded and bonded-fin heat sinks; send your load current and cooling (natural or fan).
Related VP products
Extruded and bonded-fin heat sinks, DC-link capacitors, high-speed fuses and IGBT modules for the inverter stage.
Silicotronix make; supplied by V P Electronics, Delhi.
Email: sales@vpelectronics.in. Phone: +91-8851410806
Specifications
| Brand | Silicotronix |