Sanrex DD100KB160 Dual Diode Module
DD100KB160 (VP001279) Sanrex dual diode module, 1600 V, 100 A, isolated. Datasheet and quote from V P Electronics, Delhi.
DD100KB160 (VP001279): Sanrex Dual Diode Module, 1600 V, 100 A
1600 V100 ADual diode (series)Isolated baseIsolated base
⬇ Download Datasheet (PDF)Get Quote / Bulk Price
Specifications · Applications · Selection tips · FAQ
The Sanrex DD100KB160 is a dual rectifier diode module with two diodes in series (phase leg) on an isolated base. Two or three modules build single- or three-phase bridges with easy heat sink mounting. With 1600 V blocking voltage it suits 415 V and 440 V AC mains with good surge margin.
Key specifications
| Repetitive peak reverse voltage VRRM | 1600 V |
| Non-repetitive peak voltage VRSM | 1700 V |
| Configuration | Two diodes in series (phase leg), isolated base |
| Average forward current IF(AV) | 100 A (single phase, half wave, 180°, Tc = 105 °C) |
| RMS forward current | 155 A |
| Surge current IFSM | 1800 / 2000 A (½ cycle 50 / 60 Hz) |
| I²t | 16500 A²s |
| Forward voltage VFM | 1.35 V max (320 A) |
| Reverse current IRRM | 30 mA max (at VRRM, 150 °C) |
| Rth(j-c) | 0.35 °C/W max |
| Junction temperature | –40 … +150 °C |
| Isolation Viso | 2500 V (AC, 1 min) |
| Torque (M6 mounting / M5 terminal) | 4.7 Nm / 2.7 Nm |
| Weight | 170 g |
Source: Sanrex datasheet (no revision printed). Check the full datasheet before design.
Typical applications
- Single- and three-phase rectifier bridges
- Battery chargers and DC power supplies
- Welding and electroplating rectifiers
- Freewheeling / input diodes in drives
Selection tips
- Voltage: keep at least 2.5× margin over the peak line voltage.
- Current: derate for higher case temperature and size the heat sink using the Rth values above.
- Protect with semiconductor (high-speed) fuses; use thermal paste and the specified torque.
FAQ
Can DD100KB160 be used on 415 V and 440 V AC mains?
Yes. With 1600 V repetitive voltage it has good margin for 415 V and 440 V AC lines; add MOV/RC protection where line transients are high.
Is the base plate isolated?
Yes. The base is isolated from the terminals, so it can share a common heat sink with other modules.
Do you supply the heat sink and accessories?
Yes. V P Electronics makes extruded and bonded-fin heat sinks and supplies fuses, snubber capacitors and firing cards.
Used in
Click your application to see every stage and the other parts we supply for it.
Use it with
Sanrex make; supplied by V P Electronics, Delhi.
Email: sales@vpelectronics.in. Phone: +91-8851410806
Specifications
| Brand | Sanrex, Sanrex, Sanrex, Sanrex, Sanrex |