Silicotronix MTT106M1S16 Dual Thyristor Module
MTT106M1S16 (VP000879) Silicotronix dual thyristor module, 1600 V, 110 A, 2250 A surge, 80 mm pitch. Datasheet and quote from V P Electronics, Delhi.
Documents
MTT106M1S16 (VP000879): Silicotronix Dual Thyristor Module, 1600 V, 110 A
The Silicotronix MTT106M1S16 is a dual thyristor (SCR) module in phase-leg configuration on an aluminium-oxide DBC isolated copper baseplate, in the industry-standard 80 mm pitch package. It is used in AC phase control, soft starters, controlled rectifiers and DC drives.
Datasheet available on request.
Key specifications
| Configuration | 2 thyristors, phase-leg (series) |
| VDRM / VRSM | 1600 V / 1800 V |
| ITAV (Tc = 85 °C, 180° sine) | 110 A |
| ITSM (10 ms) | 2250 A at 45 °C; 1900 A at 125 °C |
| I²t (10 ms) | 25000 A²s at 45 °C; 18000 A²s at 125 °C |
| VTM (110 A, 25 °C) | 1.25 V max |
| VT0 / rT (125 °C) | 0.9 V / 2.0 mΩ |
| Rth(j-c) per thyristor | 0.28 °C/W |
| Tj operating | -40 to +125 °C |
| Isolation | 2500 V (1 min); 3500 V (1 s) |
| di/dt / dv/dt | 150 A/µs / 1000 V/µs |
| IGT / VGT (25 °C) | 150 mA / 3 V |
| Weight | 100 g |
Values per thyristor from Silicotronix MTT/MTD 106 Series datasheet (no revision printed). Check the latest maker datasheet for your design.
Applications
AC phase control and soft starters, controlled rectifiers and battery chargers, DC motor drives, heater and temperature control, welding equipment and electroplating rectifiers.
Package and pinout
M1 package, 95.2 × 22.7 mm, 80 mm mounting pitch, M5 terminals (3 Nm ±15%), M6 heat sink mounting (5 Nm ±15%). Gate/aux pins top to bottom at terminal 3: K - G - K - G.
Equivalent parts
| Part | Make | Gate/aux pins (top to bottom, at terminal 3) | Compatibility |
|---|---|---|---|
| MCC95-16io1B | Littelfuse (IXYS) | G - K - K - G | Functional, NOT pin-to-pin — swap upper gate wires. |
| SKKT106B16E | Semikron | G - K - K - G | Functional, NOT pin-to-pin — swap upper gate wires. |
Selection tips
- Keep repetitive voltage at least 2 × the line peak voltage.
- Size the heat sink so the junction stays below the rated Tj at full load and maximum ambient.
- Use a gate trigger circuit that meets IGT / VGT at the lowest working temperature.
FAQ
Q. Is MTT106M1S16 pin-to-pin with SKKT106B16E or MCC95-16io1B?
Main terminals match, but the upper gate and auxiliary cathode pins are reversed. Swap the upper gate wires when replacing.
Q. What heat sink do I need?
It depends on current and ambient. Send your load details — VP makes bonded-fin and extrusion heat sinks sized to your stack.
Q. Do you supply larger quantities?
Yes. Send your quantity through Get Quote.
Used in
Click your application to see every stage and the other parts we supply for it.
Use it with
- Heat sink made by V P Electronics — extrusion or bonded-fin, cut to the size of your stack.
- SCR firing / trigger card made by V P Electronics for single-phase and three-phase control.
- High-speed semiconductor fuse and thermal interface material for mounting.
Silicotronix make; supplied by V P Electronics, Delhi.
Email: sales@vpelectronics.in. Phone: +91-8851410806
Specifications
| Brand | Silicotronix |