Semikron SEMIX303GB12E4P IGBT Module
SEMiX303GB12E4p (VP006580) Semikron Danfoss IGBT module, 1200 V, 300 A, half-bridge, SEMiX 3p. Datasheet and quote from V P Electronics, Delhi.
SEMiX303GB12E4p (VP006580): Semikron Danfoss Trench IGBT4 IGBT Module, 1200 V, 300 A, Half-bridge
1200 V300 AHalf-bridge (GB)SEMiX 3pTrench IGBT4 trenchIsolated 4000 V
⬇ Datasheet (Semikron Danfoss)Get Quote / Bulk Price
Specifications · Applications · Package & mounting · Selection tips · FAQ
The Semikron Danfoss SEMiX303GB12E4p is a 1200 V, 300 A half-bridge IGBT module with 4th-generation trench IGBTs and soft-switching freewheeling diodes in the SEMiX 3p (press-fit auxiliary pins) package. VCE(sat) has a positive temperature coefficient, so modules share current well in parallel. It is a common choice for UPS inverters, motor drives and welding inverters on 400–480 V AC lines.
Key specifications
| Configuration | Half-bridge (2 IGBTs + 2 anti-parallel diodes), "GB" |
| Collector-emitter voltage VCES | 1200 V |
| Nominal current ICnom | 300 A |
| Collector current IC (Tj = 175 °C) | 469 A (Tc 25 °C) / 361 A (Tc 80 °C) |
| Pulsed current ICRM | 900 A |
| VCE(sat) (VGE = 15 V) | 1.80 V typ / 2.05 V max (IC = 300 A, 25 °C); 2.20 V typ / 2.40 V max (150 °C) |
| Gate threshold VGE(th) | 5.8 V typ (5–6.5 V) |
| Gate charge QG (-8 … +15 V) | 1695 nC |
| Switching energy Eon / Eoff | 23 mJ / 38 mJ (600 V, 300 A, 150 °C) |
| Short-circuit withstand tpsc | 10 µs (800 V, 150 °C, VGE ≤ 20 V) |
| Diode forward current IF | 378 A (25 °C) / 284 A (80 °C) |
| Diode surge IFSM | 1485 A (10 ms, 25 °C) |
| Diode VF | 2.20 V typ / 2.52 V max (IF = 300 A, 25 °C) |
| Thermal resistance Rth(j-c) | 0.094 K/W per IGBT; 0.15 K/W per diode |
| Junction temperature Tj | -40 … 175 °C (reliability results valid for 150 °C) |
| Isolation Visol | 4000 V (AC, 1 min); temperature sensor to power 2500 V |
| Package | SEMiX 3p (press-fit auxiliary pins) |
| Mounting / terminal torque | M5 to heat sink 3–6 Nm; M6 terminals 3–6 Nm |
| Weight | 350 g |
Source: Semikron datasheet SEMiX303GB12E4p (Rev. 4.0, 27-05-2015, copy in VP records). Latest revision on the maker page (Datasheet button). Check the full datasheet before design.
Features
- IGBT4 trench technology, VCE(sat) with positive temperature coefficient
- High short-circuit capability (10 µs)
- Soft-switching freewheeling diodes
- Isolated base plate, industry-standard SEMiX 3p (press-fit auxiliary pins) outline with screw terminals
Typical applications
- Online UPS and inverters
- AC motor drives (VFD), servo drives
- Welding inverters
- Solar inverters, induction heating, power-electronics lab stacks
Package and mounting
SEMiX 3p (press-fit auxiliary pins) package, weight 350 g. Torque: M5 to heat sink 3–6 Nm; M6 terminals 3–6 Nm. Apply a thin, even layer of thermal paste and tighten the mounting screws in steps.
Selection tips
- Voltage: 1200 V class for 400–480 V AC (DC bus up to about 800 V); keep the bus overshoot below VCES with low-inductance busbars and snubbers.
- Current: size for IC 361 A at Tc 80 °C and check losses with Rth(j-c) 0.094 K/W per IGBT.
- Gate drive: +15 V / -8 V, short-circuit (desaturation) protection, gate resistor as per datasheet test conditions.
- Keep Tj below 150 °C in operation (datasheet recommendation).
FAQ
What gate driver do I need for SEMiX303GB12E4p?
A dual-channel isolated driver with +15 V / -8 V (or -15 V) gate supply and enough peak current for 1695 nC gate charge. V P Electronics makes such drivers (2CHDIG series) and can match the gate resistor to your switching frequency.
Can SEMiX303GB12E4p replace other 300 A, 1200 V half-bridge modules?
SEMiX 3p (press-fit auxiliary pins) is an industry-standard outline, but VCE(sat), switching losses and gate charge differ between makers and generations. Send us the part you use now; we will confirm a suitable replacement.
Is the base plate isolated?
Yes, 4000 V (AC, 1 min); temperature sensor to power 2500 V, so both modules of a 3-phase bridge can share one heat sink.
Used in
Click your application to see every stage and the other parts we supply for it.
Use it with
Semikron Danfoss make; supplied by V P Electronics, Delhi.
Email: sales@vpelectronics.in. Phone: +91-8851410806
Specifications
| Brand | Semikron, Semikron |
Alternative / Replacement Parts
The modules shown above are pin-to-pin replacements from our other brands (Semikron, MACMIC, SilverMicro). Check the outline drawing and datasheet before replacing.