Semikron SKD146/16-L140T4 Three-Phase Bridge Rectifier Module

https://www.vpelectronics.in/web/image/product.template/32955/image_1920?unique=f0e05e0

SKD146/16-L140T4 (VP008258) Semikron Danfoss bridge + brake chopper module, 1600 V, 120 A, isolated. Datasheet and quote from V P Electronics, Delhi.

₹ 0.00 0.0 INR ₹ 0.00 + GST 

Request for Quotation

  • Brand
  • Brand
  • Brand
  • Brand
  • Brand

This combination does not exist.

Terms and Conditions
100% genuine parts from authorised and verified sources
Ready stock: dispatch in 2–3 working days. Other items: delivery as confirmed in our quotation.

SKD146/16-L140T4 (VP008258): Semikron Danfoss Bridge Rectifier + IGBT Brake Chopper Module, 1600 V, 120 A

1600 V120 A bridge+ IGBT brake chopperSEMIPONT 6Isolated base

⬇ Download Datasheet (PDF)Get Quote / Bulk Price

Specifications · Applications · Selection tips · FAQ

The Semikron Danfoss SKD146/16-L140T4 is a three-phase diode bridge combined with an IGBT brake chopper, freewheeling diode and temperature sensor in one isolated module. It forms the complete input and braking stage of a compact frequency inverter. With 1600 V blocking voltage it suits 415 V and 440 V AC mains with good surge margin.

Key specifications

Repetitive peak reverse voltage VRRM1600 V
Non-repetitive peak voltage VRSM1700 V
Configuration3-phase rectifier bridge + IGBT brake chopper + freewheeling diode + temperature sensor
Bridge ID120 A continuous at Ts = 70 °C
Bridge surge IFSM / I²t1250 A / 7800 A²s
IGBT chopper VCES / IC1200 V / 150 A (120 A)
IGBT VCE(sat)1.85 V typ. / 2.1 V max
Freewheeling diode VRRM / IF1200 V / 130 A (105 A)
Rth(j-s)0.8 K/W per rectifier diode; 0.38 K/W per IGBT; 0.56 K/W per CAL diode
Temperature sensor1000 Ω (1670 Ω)
Junction temperature–40 … +175 °C (thyristor/diode 0 … +125 °C as per datasheet)
Isolation Visol3000 V (1 min) / 3600 V (1 s)
Mounting torque2.55–3.45 Nm
PackageSEMIPONT 6

Source: Semikron Danfoss datasheet (dated 29-10-2018). Check the full datasheet before design.

Typical applications

  • Input rectifier + dynamic brake for VFDs and servo drives
  • Lifts, cranes and conveyors with regenerative braking
  • Compact inverter power stages

Selection tips

  • Voltage: keep at least 2.5× margin over the peak line voltage.
  • Current: derate for higher case temperature and size the heat sink using the Rth values above.
  • Protect with semiconductor (high-speed) fuses; use thermal paste and the specified torque.
  • Size the brake resistor so the IGBT current stays within its IC rating; drive the chopper IGBT with a proper gate driver.

FAQ

Can SKD146/16-L140T4 be used on 415 V and 440 V AC mains?
Yes. With 1600 V repetitive voltage it has good margin for 415 V and 440 V AC lines; add MOV/RC protection where line transients are high.

Is the base plate isolated?
Yes. The base is isolated from the terminals, so it can share a common heat sink with other modules.

Do you supply the heat sink and accessories?
Yes. V P Electronics makes extruded and bonded-fin heat sinks and supplies fuses, snubber capacitors and firing cards.

Used in

Click your application to see every stage and the other parts we supply for it.

Use it with

Semikron Danfoss make; supplied by V P Electronics, Delhi.

Get Quote

Email: sales@vpelectronics.in. Phone: +91-8851410806

Specifications

Brand Semikron, Semikron, Semikron, Semikron, Semikron