Semikron SKD146/16-L140T4 Three-Phase Bridge Rectifier Module
SKD146/16-L140T4 (VP008258) Semikron Danfoss bridge + brake chopper module, 1600 V, 120 A, isolated. Datasheet and quote from V P Electronics, Delhi.
SKD146/16-L140T4 (VP008258): Semikron Danfoss Bridge Rectifier + IGBT Brake Chopper Module, 1600 V, 120 A
1600 V120 A bridge+ IGBT brake chopperSEMIPONT 6Isolated base
⬇ Download Datasheet (PDF)Get Quote / Bulk Price
Specifications · Applications · Selection tips · FAQ
The Semikron Danfoss SKD146/16-L140T4 is a three-phase diode bridge combined with an IGBT brake chopper, freewheeling diode and temperature sensor in one isolated module. It forms the complete input and braking stage of a compact frequency inverter. With 1600 V blocking voltage it suits 415 V and 440 V AC mains with good surge margin.
Key specifications
| Repetitive peak reverse voltage VRRM | 1600 V |
| Non-repetitive peak voltage VRSM | 1700 V |
| Configuration | 3-phase rectifier bridge + IGBT brake chopper + freewheeling diode + temperature sensor |
| Bridge ID | 120 A continuous at Ts = 70 °C |
| Bridge surge IFSM / I²t | 1250 A / 7800 A²s |
| IGBT chopper VCES / IC | 1200 V / 150 A (120 A) |
| IGBT VCE(sat) | 1.85 V typ. / 2.1 V max |
| Freewheeling diode VRRM / IF | 1200 V / 130 A (105 A) |
| Rth(j-s) | 0.8 K/W per rectifier diode; 0.38 K/W per IGBT; 0.56 K/W per CAL diode |
| Temperature sensor | 1000 Ω (1670 Ω) |
| Junction temperature | –40 … +175 °C (thyristor/diode 0 … +125 °C as per datasheet) |
| Isolation Visol | 3000 V (1 min) / 3600 V (1 s) |
| Mounting torque | 2.55–3.45 Nm |
| Package | SEMIPONT 6 |
Source: Semikron Danfoss datasheet (dated 29-10-2018). Check the full datasheet before design.
Typical applications
- Input rectifier + dynamic brake for VFDs and servo drives
- Lifts, cranes and conveyors with regenerative braking
- Compact inverter power stages
Selection tips
- Voltage: keep at least 2.5× margin over the peak line voltage.
- Current: derate for higher case temperature and size the heat sink using the Rth values above.
- Protect with semiconductor (high-speed) fuses; use thermal paste and the specified torque.
- Size the brake resistor so the IGBT current stays within its IC rating; drive the chopper IGBT with a proper gate driver.
FAQ
Can SKD146/16-L140T4 be used on 415 V and 440 V AC mains?
Yes. With 1600 V repetitive voltage it has good margin for 415 V and 440 V AC lines; add MOV/RC protection where line transients are high.
Is the base plate isolated?
Yes. The base is isolated from the terminals, so it can share a common heat sink with other modules.
Do you supply the heat sink and accessories?
Yes. V P Electronics makes extruded and bonded-fin heat sinks and supplies fuses, snubber capacitors and firing cards.
Used in
Click your application to see every stage and the other parts we supply for it.
Use it with
Semikron Danfoss make; supplied by V P Electronics, Delhi.
Email: sales@vpelectronics.in. Phone: +91-8851410806
Specifications
| Brand | Semikron, Semikron, Semikron, Semikron, Semikron |