Semikron SKD31F16 Three-Phase Bridge Rectifier Module
SKD31F16 (VP005080) Semikron Danfoss three-phase bridge module, 1600 V, 31 A, isolated. Datasheet and quote from V P Electronics, Delhi.
SKD31F16 (VP005080): Semikron Danfoss Three-Phase Bridge Rectifier Module, 1600 V, 31 A
1600 V31 A3-phase bridgeCompact case G 26Isolated base
⬇ Download Datasheet (PDF)Get Quote / Bulk Price
Specifications · Applications · Selection tips · FAQ
The Semikron Danfoss SKD31F16 is a three-phase full-wave diode bridge (six diodes) on an isolated base. It converts 3-phase AC mains into DC for drive DC links, welders, battery chargers and DC power supplies. With 1600 V blocking voltage it suits 415 V and 440 V AC mains with good surge margin.
Key specifications
| Repetitive peak reverse voltage VRRM | 1600 V |
| Non-repetitive peak voltage VRSM | 1600 V |
| ID | 31 A at Tcase = 100 °C; 44 A at 85 °C |
| Max. input voltage VRMS | 500 V |
| Surge current IFSM (10 ms) | 370 A (25 °C) / 320 A (125 °C) |
| I²t | 685 A²s (25 °C) |
| Forward voltage VF | 1.75 V max (IF = 75 A, 25 °C) |
| Threshold / slope | 0.85 V / 12 mΩ (125 °C) |
| Reverse recovery trr | 2.5 µs |
| Rth(j-c) | 2.0 K/W per diode, 0.33 K/W total |
| Junction temperature | –40 … +125 °C |
| Isolation Visol | 3600 V (1 s) / 3000 V (1 min) |
| Mounting torque | 2 Nm ±15 % |
| Weight | 66 g (approx.) |
Source: Semikron Danfoss datasheet (dated 05-12-2016). Check the full datasheet before design.
Typical applications
- Input rectifier for VFDs, servo and inverter drives
- Welding machines and battery chargers
- DC power supplies, UPS and electroplating rectifiers
- Industrial heater and DC motor supplies
Selection tips
- Voltage: keep at least 2.5× margin over the peak line voltage.
- Current: derate for higher case temperature and size the heat sink using the Rth values above.
- Protect with semiconductor (high-speed) fuses; use thermal paste and the specified torque.
FAQ
Can SKD31F16 be used on 415 V and 440 V AC mains?
Yes. With 1600 V repetitive voltage it has good margin for 415 V and 440 V AC lines; add MOV/RC protection where line transients are high.
Is the base plate isolated?
Yes. The base is isolated from the terminals, so it can share a common heat sink with other modules.
Do you supply the heat sink and accessories?
Yes. V P Electronics makes extruded and bonded-fin heat sinks and supplies fuses, snubber capacitors and firing cards.
Used in
Click your application to see every stage and the other parts we supply for it.
Use it with
Semikron Danfoss make; supplied by V P Electronics, Delhi.
Email: sales@vpelectronics.in. Phone: +91-8851410806
Specifications
| Brand | Semikron, Semikron, Semikron, Semikron, Semikron |