Semikron SKKH58/16E Thyristor-Diode Module

https://www.vpelectronics.in/web/image/product.template/30251/image_1920?unique=f0e05e0

SKKH58/16E (VP005102) Semikron Danfoss SCR-diode module, 1600 V, 55 A, isolated. Datasheet and quote from V P Electronics, Delhi.

₹ 888.00 888.0 INR ₹ 888.00 + GST 

Request for Quotation

  • Brand
  • Brand
  • Brand
  • Brand
  • Brand

This combination does not exist.

Terms and Conditions
100% genuine parts from authorised and verified sources
Ready stock: dispatch in 2–3 working days. Other items: delivery as confirmed in our quotation.

SKKH58/16E (VP005102): Semikron Danfoss Thyristor-Diode Module, 1600 V, 55 A

1600 V55 ASCR + diodeSEMIPACK 1Isolated base

⬇ Download Datasheet (PDF)Get Quote / Bulk Price

Specifications · Applications · Selection tips · FAQ

The Semikron Danfoss SKKH58/16E is a thyristor + diode module (half-controlled phase leg) on an isolated base. Three modules build a half-controlled three-phase bridge for controlled DC output. With 1600 V blocking voltage it suits 415 V and 440 V AC mains with good surge margin.

Key specifications

Repetitive peak reverse voltage VRRM1600 V
Non-repetitive peak voltage VRSM1700 V
ConfigurationThyristor + diode (half-controlled phase leg), isolated base
IT(AV) (sin. 180°)55 A (Tc = 85 °C) / 41 A (100 °C)
Surge current ITSM (10 ms)1500 A (25 °C) / 1200 A (130 °C)
I²t11250 A²s (25 °C)
On-state voltage VT1.75 V max (IT = 180 A, 25 °C)
Threshold / slope1.00 V / 4.8 mΩ max (130 °C)
(di/dt)cr / (dv/dt)cr140 A/µs / 1000 V/µs
Gate trigger VGT / IGT2.5 V / 100 mA (25 °C)
Rth(j-c) (sin. 180°)0.49 K/W per chip, 0.245 K/W per module
Junction temperature–40 … +130 °C
Isolation Visol3000 V (1 min) / 3600 V (1 s)
Torque (heat sink M5 / terminals M5)4.25–5.75 Nm / 2.55–3.45 Nm
Weight75 g
PackageSEMIPACK 1

Source: Semikron Danfoss datasheet (Rev. 3.0, 31-05-2022). Check the full datasheet before design.

Typical applications

  • Half-controlled rectifiers and battery chargers
  • DC motor drives
  • Soft starters and AC phase control
  • Heater and temperature control, electroplating rectifiers

Selection tips

  • Voltage: keep at least 2.5× margin over the peak line voltage.
  • Current: derate for higher case temperature and size the heat sink using the Rth values above.
  • Protect with semiconductor (high-speed) fuses; use thermal paste and the specified torque.
  • Thyristor gate: use a hard trigger pulse (VP SCR firing card) and an RC snubber across the thyristor.

FAQ

Can SKKH58/16E be used on 415 V and 440 V AC mains?
Yes. With 1600 V repetitive voltage it has good margin for 415 V and 440 V AC lines; add MOV/RC protection where line transients are high.

Is the base plate isolated?
Yes. The base is isolated from the terminals, so it can share a common heat sink with other modules.

Do you supply the heat sink and accessories?
Yes. V P Electronics makes extruded and bonded-fin heat sinks and supplies fuses, snubber capacitors and firing cards.

Used in

Click your application to see every stage and the other parts we supply for it.

Use it with

Semikron Danfoss make; supplied by V P Electronics, Delhi.

Get Quote

Email: sales@vpelectronics.in. Phone: +91-8851410806

Specifications

Brand Semikron, Semikron, Semikron, Semikron, Semikron