Semikron SKKH92/16E Thyristor-Diode Module
SKKH92/16E (VP005104) Semikron Danfoss SCR-diode module, 1600 V, 95 A, isolated. Datasheet and quote from V P Electronics, Delhi.
Documents
SKKH92/16E (VP005104): Semikron Danfoss Thyristor-Diode Module, 1600 V, 95 A
1600 V95 ASCR + diodeSEMIPACK 1Isolated base
⬇ Download Datasheet (PDF)Get Quote / Bulk Price
Specifications · Applications · Selection tips · FAQ
The Semikron Danfoss SKKH92/16E is a thyristor + diode module (half-controlled phase leg) on an isolated base. Three modules build a half-controlled three-phase bridge for controlled DC output. With 1600 V blocking voltage it suits 415 V and 440 V AC mains with good surge margin.
Key specifications
| Repetitive peak reverse voltage VRRM | 1600 V |
| Non-repetitive peak voltage VRSM | 1700 V |
| Configuration | Thyristor + diode (half-controlled phase leg), isolated base |
| ITAV (sin. 180°) | 95 A (Tc = 85 °C) / 68 A (100 °C); ITRMS 150 A |
| Surge current ITSM (10 ms) | 2000 A (25 °C) / 1750 A (125 °C) |
| I²t | 20000 A²s (25 °C) |
| On-state voltage VT | 1.65 V max (IT = 300 A, 25 °C) |
| Threshold / slope | 0.9 V / 2 mΩ max (125 °C) |
| (di/dt)cr / (dv/dt)cr | 150 A/µs / 1000 V/µs |
| Gate trigger VGT / IGT | 3 V / 150 mA (25 °C) |
| Rth(j-c) (sin. 180°) | 0.3 K/W per thyristor, 0.15 K/W per module |
| Junction temperature | –40 … +125 °C |
| Isolation Visol | 3000 V (1 min) / 3600 V (1 s) |
| Torque (heat sink / terminals) | 5 Nm ±15 % / 3 Nm ±15 % |
| Weight | 95 g |
| Package | SEMIPACK 1 (case A 47) |
Source: Semikron Danfoss datasheet (dated 04-03-2026). Check the full datasheet before design.
Typical applications
- Half-controlled rectifiers and battery chargers
- DC motor drives
- Soft starters and AC phase control
- Heater and temperature control, electroplating rectifiers
Selection tips
- Voltage: keep at least 2.5× margin over the peak line voltage.
- Current: derate for higher case temperature and size the heat sink using the Rth values above.
- Protect with semiconductor (high-speed) fuses; use thermal paste and the specified torque.
- Thyristor gate: use a hard trigger pulse (VP SCR firing card) and an RC snubber across the thyristor.
FAQ
Can SKKH92/16E be used on 415 V and 440 V AC mains?
Yes. With 1600 V repetitive voltage it has good margin for 415 V and 440 V AC lines; add MOV/RC protection where line transients are high.
Is the base plate isolated?
Yes. The base is isolated from the terminals, so it can share a common heat sink with other modules.
Do you supply the heat sink and accessories?
Yes. V P Electronics makes extruded and bonded-fin heat sinks and supplies fuses, snubber capacitors and firing cards.
Used in
Click your application to see every stage and the other parts we supply for it.
Use it with
Semikron Danfoss make; supplied by V P Electronics, Delhi.
Email: sales@vpelectronics.in. Phone: +91-8851410806
Specifications
| Brand | Semikron, Semikron, Semikron, Semikron, Semikron |