Semikron SKKT106B16E Dual Thyristor Module
SKKT106B16E (VP005118) Semikron Danfoss dual thyristor module, 1600 V, 106 A, 2.25 kA surge, SEMIPACK 1. Datasheet and quote from V P Electronics, Delhi.
Documents
SKKT106B16E (VP005118): Semikron Danfoss Dual Thyristor Module, 1600 V, 106 A
The Semikron Danfoss SKKT106B16E is a dual thyristor (SCR) module in phase-leg configuration in the SEMIPACK 1 package, with an isolated baseplate for direct heat sink mounting. It is widely used in AC controllers, soft starters and controlled rectifier bridges.
Key specifications
| Configuration | 2 thyristors, phase-leg (series), SEMIPACK 1 |
| VRRM / VDRM | 1600 V |
| ITAV (Tc = 85 °C) | 106 A |
| ITSM (10 ms) | 2.25 kA |
| VT max | 1.65 V |
| Max. junction temperature | 130 °C |
| IGT / VGT | 150 mA / 3 V |
Values from Semikron Danfoss SKKT106 / 106B datasheet AI498337230266en-000202 (04-03-2026) as listed by distributor; check the maker datasheet for your design.
Applications
AC phase control and soft starters, controlled rectifiers and battery chargers, DC motor drives, heater and temperature control, welding equipment and electroplating rectifiers.
Package and pinout
SEMIPACK 1, 80 mm mounting pitch, screw main terminals (1 = AC, 2 = cathode, 3 = anode) and push-on gate/auxiliary cathode tabs.
Equivalent parts
| Part | Make | Gate/aux pins (top to bottom, at terminal 3) | Compatibility |
|---|---|---|---|
| MCC95-16io1B | Littelfuse (IXYS) | G - K - K - G | Pin-to-pin. MCC95 is rated 116 A and 4000 V isolation. |
| MTT106M1S16 | Silicotronix | K - G - K - G | Functional, NOT pin-to-pin — upper gate/aux cathode reversed; swap upper gate wires. Isolation 2500 V. |
Selection tips
- Keep repetitive voltage at least 2 × the line peak voltage.
- Size the heat sink so the junction stays below the rated Tj at full load and maximum ambient.
- Use a gate trigger circuit that meets IGT / VGT at the lowest working temperature.
FAQ
Q. Is SKKT106B16E pin-to-pin with MCC95-16io1B?
Yes, main terminals and gate pins match; MCC95-16io1B is rated 116 A.
Q. Can MTT106M1S16 replace it?
Yes as a functional equivalent, but the upper gate and auxiliary cathode pins are reversed — swap the upper gate wires.
Q. Do you supply larger quantities?
Yes. Send your quantity through Get Quote.
Used in
Click your application to see every stage and the other parts we supply for it.
Use it with
- Heat sink made by V P Electronics — extrusion or bonded-fin, cut to the size of your stack.
- SCR firing / trigger card made by V P Electronics for single-phase and three-phase control.
- High-speed semiconductor fuse and thermal interface material for mounting.
Semikron Danfoss make; supplied by V P Electronics, Delhi.
Email: sales@vpelectronics.in. Phone: +91-8851410806
Specifications
| Brand | Semikron |