Semikron SKKT570/16E Dual Thyristor Module
SKKT570/16E (VP005116) Semikron Danfoss dual thyristor module, 1600 V, 570 A, isolated. Datasheet and quote from V P Electronics, Delhi.
Documents
SKKT570/16E (VP005116): Semikron Danfoss Dual Thyristor Module, 1600 V, 570 A
1600 V570 ASCR-SCR phase-legSEMIPACK 5Isolated 3000 V
⬇ Download Datasheet (PDF)Get Quote / Bulk Price
Specifications · Applications · Package & mounting · Selection tips · FAQ
The Semikron Danfoss SKKT570/16E is a dual thyristor (SCR-SCR) module with two thyristors in a phase-leg connection on an isolated base plate. It is used for AC phase control, soft starters and half-controlled or fully controlled rectifier bridges. With 1600 V blocking voltage it suits 415 V and 440 V AC mains with good surge margin.
Key specifications
| Configuration | Dual thyristor (SCR-SCR), phase-leg / series connection |
| Repetitive peak voltage VRRM/VDRM | 1600 V |
| Non-repetitive peak voltage VRSM | 1700 V |
| Average on-state current ITAV (sin. 180°) | 570 A (Tc = 85 °C) / 435 A (100 °C); ITRMS 1000 A |
| Surge current ITSM (10 ms) | 19000 A (25 °C) / 15500 A (135 °C) |
| I²t (10 ms) | 1805000 A²s (25 °C) |
| On-state voltage VT | 1.44 V max (IT = 1700 A, 25 °C) |
| Threshold voltage / slope resistance | 0.78 V / 0.32 mΩ (135 °C) |
| Thermal resistance Rth(j-c) | 0.072 K/W per thyristor, 0.036 K/W per module (sin. 180°) |
| Junction temperature Tj | -40 … 135 °C |
| (di/dt)cr / (dv/dt)cr | 250 A/µs / 1000 V/µs |
| Gate trigger VGT / IGT | 3 V / 200 mA (25 °C) |
| Isolation voltage Visol (50 Hz rms) | 3000 V (1 min) / 3600 V (1 s) |
| Package | SEMIPACK 5 |
| Mounting / terminal torque | M6 to heat sink 4.25–5.75 Nm; M10 terminals 10.2–13.8 Nm |
| Weight (approx.) | 1400 g |
Source: Semikron Danfoss datasheet SKKT570 (Rev. 2, 09-12-2014). Values are per thyristor unless stated. Check the full datasheet before design.
Features
- Two thyristors in one module, phase-leg connection, simple bus-bar wiring
- Isolated base plate (3000 V rms, 1 min), common heat sink possible
- High surge current rating: 19000 A for 10 ms
- Industry standard SEMIPACK 5 package, screw terminals
Typical applications
- AC motor soft starters and AC voltage controllers
- Controlled rectifiers for DC motor drives and battery chargers
- Heater, furnace and temperature control
- Electroplating and welding rectifiers, light dimming
Package and mounting
SEMIPACK 5 package, weight about 1400 g. Torque: M6 to heat sink 4.25–5.75 Nm; M10 terminals 10.2–13.8 Nm. Use thermal paste on the base and tighten the screws evenly.
Selection tips
- Voltage: 1600 V suits 415 V and 440 V AC lines; keep at least 2.5× margin over the peak line voltage.
- Current: rated 570 A (Tc = 85 °C) / 435 A (100 °C); derate for higher case temperature and size the heat sink using Rth(j-c) 0.072 K/W per thyristor.
- Protect with semiconductor (high-speed) fuses and an RC snubber across each thyristor.
- Gate drive: trigger with at least 3 V / 200 mA and a hard pulse for reliable turn-on.
FAQ
Is SKKT570/16E pin-to-pin with other 570 A dual thyristor modules?
Many makers offer modules in the same SEMIPACK 5 outline, but gate and auxiliary cathode pin order can differ. Send us the part you use now and we will confirm the exact cross-reference and pinout before supply.
Is the base plate isolated?
Yes. The base is isolated from the terminals (3000 V (1 min) / 3600 V (1 s)), so several modules can be mounted on one common heat sink.
Do you supply the gate driver and heat sink?
Yes. V P Electronics makes SCR firing cards, extruded and bonded-fin heat sinks and supplies fuses and snubber capacitors for complete thyristor stacks.
Used in
Click your application to see every stage and the other parts we supply for it.
Use it with
Semikron Danfoss make; supplied by V P Electronics, Delhi.
Email: sales@vpelectronics.in. Phone: +91-8851410806
Specifications
| Brand | Semikron, Semikron, Semikron |