Semikron SKM195GB066D IGBT Module
SKM195GB066D (VP005146) Semikron Danfoss IGBT module, 600 V, 200 A, half-bridge, SEMITRANS 2. Datasheet and quote from V P Electronics, Delhi.
Documents
SKM195GB066D (VP005146): Semikron Danfoss Trench IGBT Module, 600 V, 200 A, Half-bridge
600 V200 AHalf-bridge (GB)SEMITRANS 2Trench IGBTIsolated 4000 V
⬇ Datasheet (PDF)Get Quote / Bulk Price
Specifications · Applications · Package & mounting · Selection tips · FAQ
The Semikron Danfoss SKM195GB066D is a 600 V, 200 A half-bridge module (Trench IGBT) with anti-parallel freewheeling diodes in the SEMITRANS 2 package with isolated base plate. It is used in inverters, UPS, motor drives, welding and induction heating on 200–240 V AC lines.
Key specifications
| Configuration | Half-bridge (2 IGBTs + 2 anti-parallel diodes), "GB" |
| Collector-emitter voltage VCES | 600 V |
| Nominal current | 200 A |
| Collector current IC (Tj 175 °C) | 265 A (Tc 25 °C) / 200 A (Tc 80 °C) |
| Pulsed current ICRM | 400 A |
| VCE(sat) (IC = 200 A, VGE = 15 V, chip) | 1.45 V typ / 1.9 V max (25 °C); 1.7 V typ / 2.1 V max (150 °C) |
| Gate threshold VGE(th) | 5.8 V typ (5–6.5 V) |
| Gate charge QG (-8 … +15 V) | 1500 nC |
| Switching energy Eon / Eoff | 14 mJ / 8 mJ (300 V, 200 A, 150 °C) |
| Short-circuit withstand tpsc | 6 µs (360 V, 150 °C) |
| Diode forward current IF | 200 A (25 °C) / 130 A (80 °C) |
| Diode surge IFSM | 1400 A (10 ms, 175 °C) |
| Diode VF (IF = 200 A) | 1.4 V typ / 1.6 V max (25 °C) |
| Thermal resistance Rth(j-c) | 0.22 K/W per IGBT; 0.4 K/W per diode |
| Junction temperature Tj | -40 … +175 °C |
| Isolation Visol | 4000 V (AC, 1 min) |
| Mounting / terminal torque | M6 to heat sink 3–5 Nm; M5 terminals 2.5–5 Nm |
| Weight | 150 g |
| Package | SEMITRANS 2 |
Source: Semikron datasheet SKM195GB066D (dated 06-10-2009, copy in VP records). Ask us for the latest revision. Check the full datasheet before design.
Typical applications
- Online UPS and inverters
- AC motor drives (VFD)
- Welding inverters and induction heating
- Battery chargers, SMPS and power-electronics lab stacks
Package and mounting
SEMITRANS 2 industry-standard package with screw terminals and isolated base plate. Apply a thin, even layer of thermal paste and tighten the mounting screws in steps to the torque in the table.
Selection tips
- Voltage: 600 V class for 200–240 V AC (DC bus up to about 400 V); keep bus overshoot below VCES with low-inductance busbars and snubbers.
- Current: size from the IC rating at your case temperature and check losses with Rth(j-c).
- Gate drive: +15 V / negative turn-off, short-circuit protection, gate resistor as per datasheet.
- Keep Tj within 175 °C maximum with margin.
FAQ
What gate driver do I need for SKM195GB066D?
A dual-channel isolated driver with +15 V turn-on, negative turn-off (-8 V to -15 V) and desaturation (short-circuit) protection. V P Electronics makes such drivers (2CHDIG series) and can match the gate resistor to your switching frequency.
Can SKM195GB066D replace other 200 A, 600 V half-bridge modules?
SEMITRANS 2 is an industry-standard outline, but VCE(sat), switching losses and gate charge differ between makers and generations. Send us the part you use now; we will confirm a suitable replacement.
Is the base plate isolated?
Yes, 4000 V (AC, 1 min), so the modules of a 3-phase bridge can share one heat sink.
Used in
Click your application to see every stage and the other parts we supply for it.
Use it with
Semikron Danfoss make; supplied by V P Electronics, Delhi.
Email: sales@vpelectronics.in. Phone: +91-8851410806
Specifications
| Brand | Semikron, Semikron |
Alternative / Replacement Parts
The modules shown above are pin-to-pin replacements from our other brands (Semikron, MACMIC, SilverMicro). Check the outline drawing and datasheet before replacing.