Semikron SKM300GB066D IGBT Module
SKM300GB066D (VP008415) Semikron Danfoss IGBT module, 600 V, 300 A, half-bridge, SEMITRANS 3. Datasheet and quote from V P Electronics, Delhi.
Documents
SKM300GB066D (VP008415): Semikron Danfoss Trench IGBT Module, 600 V, 300 A, Half-bridge
600 V300 AHalf-bridge (GB)SEMITRANS 3Trench IGBTIsolated 4000 V
⬇ Datasheet (PDF)Get Quote / Bulk Price
Specifications · Applications · Package & mounting · Selection tips · FAQ
The Semikron Danfoss SKM300GB066D is a 600 V, 300 A half-bridge module (Trench IGBT) with anti-parallel freewheeling diodes in the SEMITRANS 3 package with isolated base plate. It is used in inverters, UPS, motor drives, welding and induction heating on 200–240 V AC lines.
Key specifications
| Configuration | Half-bridge (2 IGBTs + 2 anti-parallel diodes), "GB" |
| Collector-emitter voltage VCES | 600 V |
| Nominal current | 300 A |
| Collector current IC (Tj 175 °C) | 390 A (Tc 25 °C) / 300 A (Tc 80 °C) |
| Pulsed current ICRM | 600 A |
| VCE(sat) (IC = 300 A, VGE = 15 V, chip) | 1.45 V typ / 1.9 V max (25 °C); 1.7 V typ / 2.1 V max (150 °C) |
| Gate threshold VGE(th) | 5.8 V typ (5–6.5 V) |
| Gate charge QG (-8 … +15 V) | 2400 nC |
| Switching energy Eon / Eoff | 7.5 mJ / 11.5 mJ (300 V, 300 A, 150 °C) |
| Short-circuit withstand tpsc | 6 µs (360 V, 150 °C) |
| Diode forward current IF | 350 A (25 °C) / 250 A (80 °C) |
| Diode surge IFSM | 1760 A (10 ms, 175 °C) |
| Diode VF (IF = 300 A) | 1.4 V typ / 1.6 V max (25 °C) |
| Thermal resistance Rth(j-c) | 0.15 K/W per IGBT; 0.25 K/W per diode |
| Junction temperature Tj | -40 … +175 °C |
| Isolation Visol | 4000 V (AC, 1 min) |
| Mounting / terminal torque | M6 to heat sink 3–5 Nm; M6 terminals 2.5–5 Nm |
| Weight | 325 g |
| Package | SEMITRANS 3 |
Source: Semikron datasheet SKM300GB066D (dated 06-10-2009, copy in VP records). Ask us for the latest revision. Check the full datasheet before design.
Typical applications
- Online UPS and inverters
- AC motor drives (VFD)
- Welding inverters and induction heating
- Battery chargers, SMPS and power-electronics lab stacks
Package and mounting
SEMITRANS 3 industry-standard package with screw terminals and isolated base plate. Apply a thin, even layer of thermal paste and tighten the mounting screws in steps to the torque in the table.
Selection tips
- Voltage: 600 V class for 200–240 V AC (DC bus up to about 400 V); keep bus overshoot below VCES with low-inductance busbars and snubbers.
- Current: size from the IC rating at your case temperature and check losses with Rth(j-c).
- Gate drive: +15 V / negative turn-off, short-circuit protection, gate resistor as per datasheet.
- Keep Tj within 175 °C maximum with margin.
FAQ
What gate driver do I need for SKM300GB066D?
A dual-channel isolated driver with +15 V turn-on, negative turn-off (-8 V to -15 V) and desaturation (short-circuit) protection. V P Electronics makes such drivers (2CHDIG series) and can match the gate resistor to your switching frequency.
Can SKM300GB066D replace other 300 A, 600 V half-bridge modules?
SEMITRANS 3 is an industry-standard outline, but VCE(sat), switching losses and gate charge differ between makers and generations. Send us the part you use now; we will confirm a suitable replacement.
Is the base plate isolated?
Yes, 4000 V (AC, 1 min), so the modules of a 3-phase bridge can share one heat sink.
Used in
Click your application to see every stage and the other parts we supply for it.
Use it with
Semikron Danfoss make; supplied by V P Electronics, Delhi.
Email: sales@vpelectronics.in. Phone: +91-8851410806
Specifications
| Brand | Semikron, Semikron |
Alternative / Replacement Parts
The modules shown above are pin-to-pin replacements from our other brands (Semikron, MACMIC, SilverMicro). Check the outline drawing and datasheet before replacing.